Protocol Tools
Fluke Network Time Machine
High-performance critical link analysis, storage for data forensics and back-in-time troubleshooting
At a Glance
- Network forensic analyzer with application-centric analysis for quick root cause diagnosis of network and application performance problems
- Content playback, deep packet analysis and decodes
- Best-in-class, real-time Video/Voice over IP metrics and troubleshooting for enterprise networks
- Atlas feature facilitates the mining of application, network and data link data by providing QoS metrics, statistics and trending charts of application and flow level data
- Custom PGA-based monitoring interface supports traffic capture on multiple 10/100 Mbps, 1 Gbps and 10 Gbps Ethernet interfaces at full line rate
- High performance stream-to-disk hardware with RAID hard disk controller stores and analyzes up to 60 TBs of live traffic
- Multiple hardware platforms – from portable to rack mounted – suit broad deployment needs
Product Capabilities
The Network Time Machine is an all-in one data recording and analysis solution that is capable of monitoring and capturing data on four channels of 1 and 10 Gbps Ethernet and storing the captured data on an internal RAID sub-storage system. Its Atlas feature provides real-time and post capture traffic analysis showing statistics on traffic from layers 2 to 7, making it easy for users to identify traffic of interest. Deep packet analysis is done by the application-centric analysis engine built-in to the ClearSight Analyzer software for quick application problem identification, and quick drill down to isolate timing or application coding issues. Multi-segment analysis is standard to facilitate analysis of captured traffic from multiple network segments using one or more Network Time Machine products, making isolation of network performance issues a snap.
Critical link health analysis
• Real-time traffic monitoring alerts you to problems in network and application health.
• Capture cards with high-performance multiport interfaces for 1G and 10G line rate allow traffic recording, including physical errors and jumbo frames.
• Fluke Networks offers an array of inline, aggregation or switching taps to interface to the network.
Multi-segment network forensics
• Connect NTM to multiple links or deploy multiple NTM units for the ability to synchronize, merge and analyze flows from different locations and generate a multi-segment ladder diagram. Quickly
visualize and isolate the root cause of network problems, such as packet drop or abnormal network latency.
Application performance forensics
• Use the optional Atlas software to see backwards in time. Identify application flow problems – even if they’re intermittent.
• Get TCP/IP error statistics, review application response times and see in-depth application performance analysis.
• Offer in-depth analysis of SQL, Oracle, MS Networking (SMB), VoIP, DNS, FTP, HTTP, POP3, Telnet, SMTP, SNMP, MS Exchange and Citrix.
VoIP performance analysis
• The Atlas option provides extensive QoS, call type and codec analysis.
• See call setup problems (e.g. can’t connect, busy) without needing to see packet decode.
• Drill-down to see which users (by phone number) are affected by poor quality or call setup issues – and vice versa.
• Playback voice and video for problem verification
Compliance/security forensics
• Use Atlas to see user traffic patterns, a server susceptible to tampering, as well as compliance and security violations.
• Pattern matching with free offset, and application/flow based filtering feature quickly identify relevant flow in the captured traffic.
• With the detailed analysis from a ClearSight Analyzer, see where and how issues occur.
• FTP, messaging, email, voice or video can be played back to quickly gather the evidence required for action.
Network Time Machine Selection Guide
| Model |
Express |
Standard |
Standard EA |
Premium |
Portable1A |
Portable2 |
|
Model Number |
CSN/NTM-EX3 |
CSN/NTM-ST3-4TB |
CSN/NTM-ST3-EA |
CSN/NTM-PR3-S5 |
CSN/NTM-PO1A |
CSN/NTM-PO2-1G |
|
Interface Rate (Gbps) |
1 |
1 |
1 |
10 |
1 |
1 or 10 |
|
Number and Type of Interfaces |
4 SFP |
4 SFP |
4 SFP |
2 XFP |
4 SFP |
4 SFP or |
|
Type of Media Supported |
10/100/1000 |
10/100/1000 |
10/100/1000 |
10GBase-SR |
10/1001000 |
10/1001000 |
|
Steam-to-disk Throughput |
2.5 |
4 |
4 |
10 |
2 |
3 |
|
RAID Configuration |
0 |
0 |
5 |
5 |
0 |
5 |
|
Raw Capacity (TB)2 |
2 |
12 |
12+24 |
3.6+7.2 |
1.9 |
3.3 |
|
OS+Metadata Capacity (TB)3 |
0.8 |
3.2 |
9.3 |
2.8 |
0.4 |
1.1 |
|
PacketStore Capacity (TB)4 |
1 |
4/8 |
20 |
6.1 |
1.4 |
1.7 |
|
Max. capacity with |
N/A |
N/A |
60 with 2 |
18.3 with 2 |
N/A |
N/A |
|
Multiple Concurrent Remote Viewer/ Configuration |
0/1 |
3/1 |
3/1 |
3/1 |
3/0 |
3/0 |
1. Stream-to-disk throughput is the maximum traffic rate that NTM can store data to disk with no packet loss. The traffic was all 64 byte packets and the test was run no less than 3 hours
2. Raw capacity is total raw hard disk storage available. It will be consumed by OS, NTM system programs, PacketStore and other temporary program buffers
3. OS+Metadata capacity are disk space reserved for OS, NTM System Software and the Metadata database where packet indexing data is kept.
4. PacketStore is the database where packets captured are stored. Amount specified is disk space reserved for storage.
Product Specifications
| Model |
Express |
Standard |
Standard EA |
Premium |
Portable1A |
Portable2 |
| Model Number |
CSN/NTM-EX3 |
CSN/NTM-ST3-4TB |
CSN/NTM-ST3-EA |
CSN/NTM-PR3-S5 |
CSN/NTM-PO1A |
CSN/NTM-PO2-1G |
|
CPU |
Quad Core Intel |
Two Quad Core |
Two Quad Core
|
Two Quad Core |
Intel Quad |
L5420 Quad |
|
OS |
Windows Server 2008 |
Windows Server 2008 |
Windows Server 2008 |
Windows Server 2008 |
Windows XP |
Windows Server 2003 |
|
Memory |
4 GB |
4 GB |
4 GB |
4 GB |
4 GB |
4 GB |
|
Power supply |
50/60 Hz, |
50/60 Hz, |
50/60 Hz, |
50/60 Hz, |
50/60 Hz, |
50/60 Hz, |
|
Power consumption |
One non-redundant 350 W |
High output, two |
High output, two |
High output, two |
460 W auto switching |
460 W auto switching |
|
Dimensions |
Height: 4.24 cm (1.67”) |
Height: 8.64 cm (3.40”) |
Mainframe |
Mainframe |
Height: 29 cm (11.44”) |
Height: 29 cm |
| Weight |
9.1 kg (20 lb) |
26.1 kg (57.54 lb) |
26.1 kg (57.54 lb) |
26.1 kg (57.54 lb) |
10.2kg (22.5lb) |
10.2 kg |
• Service Assurance and troubleshooting
• Branch office performance and remote troubleshooting
• Capture unexpected events during data center consolidation projects
• Unified communication deployment assessment and troubleshooting
Prove that it is not the network with complete picture
Where Network Time Machine are be deployed
Fluke Network Time Machine Datasheet
Fluke Portable Network Time Machine Datasheet
At a Glance
Application centric monitoring and performance analysis simplifies protocol analysis to sp...
Read More
At a Glance
Network forensic analyzer with application-centric analysis for quick root cause diagnosis of ne...
Read More
The 960B is a powerful multi-channel IP Telephony test instrument. By combining TDM, Ethernet and Analog interfaces w...
Read More
This testing solution operates on:
Laptop or Desktop
Windows XP / Vista /Windows 7 32 bit
T...
Read More
UC Testbook is the first dedicated tool for the installation and maintenance of VoIP/UC products and services. SIP/...
Read More
The STINGA ISDN Monitor is a stand-alone real-time ISDN protocol analyzer - a complete system of softwa...
Read More
STINGA Protocol Simulators simulate and generate realistic network traffic. It is an essential tool for netw...
Read More
STINGA Mobile Monitor is a stand-alone real-time Mobile protocol analyser—a complete system of software and hardware...
Read More
For Network providers this is a vital tool for error tracking and delivering Quality of Service (QoS).
Mon...
Read More
STINGA Protocol Simulators simulate and generate realistic network traffic. It is an essential tool for network prov...
Read More