Features and Benefits
| The TX50e is a feature rich hand-held solution for testing and evaluating 2 Mbps and 64 kbps digital circuits. A unique combination of signal quality measurements including ITU-T compliant BER performance analysis makes the unit a perfect choice for technicians installing, maintaining or troubleshooting 2 Mbps networks. In addition, the TX50e can be used to feed data via USB port to Ethereal for protocol analysis. |
- High resolution, 3.5 color LCD with intuitive menu structure
- Tri-color LED's for real-time monitoring of circuit status
- Compact and robust design optimized for field applications
- In-Service and Out of Service measurements
- 2 Mbps and N x 64Kbps support
- Frequency and Level measurements
- Line rate offset
- Round Trip Delay
- Error and alarm insertion/measurements
- PRBS, fixed and user defined test patterns
- Analysis per G.821, G.826 and M.2100
- Timeslot contents and activity monitor
- Pulse shape analysis per G.703 mask and limits
- Oscilloscope function to view 2 Mbps signal
- Jitter measurement and generation to ITU 0.171
- Maximum Jitter Tolerance (MTJ)
- Jitter Transfer Function (JTF) analysis
- Voice frequency generation and analysis
- Headset port for VF functions
- Protocol capture for PC analysis via USB port
|
|
Specifications
Interface
Number of test ports: 1
Interface and Pulse Shape: Conforms to G.703
Bit rate: 2,048 Mbit/s
Impedance: 120© balanced or 75© unbalanced
Connectors: RJ45 or banana (120©) or BNC (75©)
Line coding: AMI, HDB3
Max. Output jitter: 0.015 UIpp (Conforms to G.823)
Clock source
Internal: 2,048 Mbps ± 3 ppm
External: 2,048 MHz or 2,048 Mbps
Recovered: From received signal
Offset ± 6 kHz in 1 Hz resolution
Signal Structure
PCM-30, PCM-31, PCM-30C, PCM-31C, Unstructured conforms to G.704
64 kbps, n x 64 kbps, contiguous or non-contiguous
see brochure ...
|
General Specifications
Size 155 x 85 x 40 mm (H x W x D)
(6.1 x 3.34 x 1.57 in)
Weight Less than 0.5 kg (less than 1.1 lbs)
Battery NiMH with 6 hours autonomy
AC Adapter 100 to 240 AC, 50/60Hz
Display 320x240 pixels, backlight color LCD
LED SIG, AIS, FRM, MFR, RDI, SES, RMA, PAT
Remote Control USB slave mode
Receiver
Interface
Number of test ports: 2 (Rx, Sync)
Interface: Conforms to G.703
Bit rate: 2,048 Mbit/s
Impedance: 120ohm balanced or 75ohm unbalanced
Sensitivity: Up to -36 dB in the long-haul mode
|
|
Applications
- Voice Frequency Testing
- Bit Error Rate Testing
- Frame and TS Monitoring
- Pulse Shape Analysis
- Oscilloscope Function
- Performance Analysis
- Jitter Generation
- Protocol Analysis
- Jitter Measurement
|
 |
 |
Data Sheet
table width="960" border="0">
TX Family
VeEX TX series packs test rates from 1.5Mbps to 2.5G in the world's smallest handheld unit. Color graphical display assisted with touch panel enables users tapping through the test configuration and accessing the complicated overhead bits and bytes. Features including APS, TDM, pointer adjustment, pulse mask analysis, G.821/G.826/M.2100, histogram, and overhead access.
TX50e - Handheld 2Mbps Test Set
The TX50e is a feature rich hand-held solution for testing and evaluating 2 Mbps and 64 kbps digital circuits
 TX50e - Handheld 2Mbps Test Set
The TX150E is a compact and ruggedized tester for installing, commissioning and troubleshooting SDH, PDH and T-Carrier networks. For more detail click here for Product Page or view data sheet below
TX150e - Handheld SDH/PDH Test set
Full details on the VeEX product range covering a broad spectrum of transmission technologies includng xDSL, Ethernet, PDH/SDH, CATV, and Fibre Channel see Product Catalogue below;
VeEX Product Catalogue
|
|
