Previous Page Print this Page

VeEX - MX100 Fibre Channel Test Suite

VePAL MX100 Fibre Channel Test Suite for the Metro Expert

 

The Fibre Channel Test Suite option for the VeEX" VePAL MX100 Metro Expert allows for the testing of 1.0625 Gbps and 2.125 Gbps point-to-point Fibre Channel networks.

VePAL MX100 Metro Expert

Enquiry Support Options Training Ask Bart

Features and Benefits

Fibre Channel Test Suite Highlights

  • The Fibre Channel Test Suite combined with the MX100 s Ethernet and Gigabit Ethernet testing capabilities make it an ideal all-in-one solution for testing Fibre Channel and Ethernet services
  • Test 1 Gbps and 2 Gbps Fibre Channel services
  • Test FICON services (with FC-2)
  • Verify the transport of Fibre Channel frames with buffer-to-buffer credit management
  • Measure BER, frame loss, and round trip delay across a point-to-point Fibre Channel link Key Features
  • 1.0625 Gbps and 2.125 Gbps Speeds
  • Point-to-Point Topology Testing
  • FC-1 and FC-2 BERT
  • Flow Control Support; configurable buffer-to-buffer credits
  • FC-2 Frame Header configuration
  • Primitive Sequence Protocol support; link initialization, link reset, link failure
  • Traffic generation from 0.01% to 100%
  • Frame Length configuration up to 2148 bytes
  • Traffic shaping; constant, ramp, and burst profiles
  • FC-2 Smart Loop mode
VePAL CX100 Series

Specifications

Interfaces
  • Single 1000Base-X SFP port, LC Connector
  • Tri-rate 1000Base-SX, 850 nm SFP (1.0625, 2.125, and 1.25 Gbps)
  • Tri-rate 1000Base-LX, 1310 nm SFP (1.0625, 2.125, and 1.25 Gbps)

  • Fibre Channel Speeds
  • 1.0625 and 2.125 Gbps

  • Modes of Operation
  • Terminated
  • Loopback

  • Fibre Channel Topology
  • Point-to-Point - See datasheet for more info

  • Applications

    Data Sheet

    MX 100/120/Fibre - Next Generation of Metro and Carrier Ethernet Testing
    VeEX VePAL MX100 Metro Expert is the next generation of Metro and Carrier Ethernet field test equipment for Ethernet Networks carrying Voice, Data and Video.

    pdfimageVepal MX 100 Handheld Ethernet Test Set

    pdfimageVepal Mx 120 Dual Port Ethernet Handheld Test Set

    pdfimageVepal Mx Fibre Channel Test Suitefor the Metro Expert -The Fibre Channel Test Suite option for the VeEX VePAL MX100 Metro Expert allows for the testing of 1.0625 Gbps and 2.125 Gbps point-to-point Fibre Channel networks.

    Full details on the VeEX product range covering a broad spectrum of transmission technologies includng xDSL, Ethernet, PDH/SDH, CATV, and Fibre Channel see Product Catalogue below;
    pdfimageVeEX Product Catalogue

    Back to Top Previous Page Print this Page
    © 2004-2010 Frame Communications Limited
    Site Terms

    Registered in England No.2843499