VeEX - CX40 Hand Held Time Domain Reflectometer (TDM)
CX40 -
This palm size, light weight TDR is an ideal tool for co-axial and twisted pair cable fault location. The One-touch Automatic Fault Locating (AFL) feature quickly identifies cable faults within a distance range of 4,000 meters or 12,000 feet, while the graphic display simplifies viewing of detected impairments. Velocity of Propagation (Vp), attenuation and cable range can be easily programmed via the units user friendly interface. Four Alkaline batteries provide up to 30 hours of continuous autonomy and an auto power off mode extends the battery life for months of normal daily usage. A transflective LCD with backlight enables operation under any lighting conditions.
Features and Benefits
The CX40 is a hand held Time Domain Reflectometer with
11 range scales covering the range 0-4000 meters, with a
7 mater first range scale and a 0.5 meter dead zone near and
far end faults are clearly displayed on its 128x64 pixel back
light Liquid Crystal Display.
The Auto Fault Location key will move the cursor directly to
the first event or fault, thus eliminating the need to visually
interpret the wave form. When set in manual mode, the
wave form may be visually scanned as on conventional TDRs.
In both modes the user variable gain covering the range of
default to 64 dbs may be used to magnify small events identified
on the waveform. The scan lock feature will allow the
user to hold the trace for closer examination.
Designed for identifying and locating faults on all metallic
cables with two or more insulated conductors. The CX40
has impedance matched circuits for 25, 50, 75 and 100 ohms
and with velocity of propergation settings from 1-99% (or
the equivalent in feet or meters/micro second) will cover the
range of power, data, communication and CCTV cables.
Housed in a rugged IP54 rated ABS enclosure and weighing
only 350 grams (12 ounces), the CX40 is suitable for outside
use.
Specifications
Auto Fault Location
Rugged Palm-Top design
Weighs less than 350g (12oz)
11 Measurement Ranges up to 4000m
25, 50, 75 & 100ohm Selectable Cable Impedance
User Variable Gain Control
Built in Tone Generator for Pair Tracing and Identification
Suitable for testing all Communication and Power Cables
Full details on the VeEX product range covering a broad spectrum of transmission technologies includng xDSL, Ethernet, PDH/SDH, CATV, and Fibre Channel see Product Catalogue below; VeEX Product Catalogue
